Power Probe OBD II Breakout Testing Box Specialty Measurement Chargers and charge cords must

Chargers and charge cords must be purchased separately

1/2" Drive x 7/8" & 5/16" Deep Length Flip Impact Socket

set screw bit retention

For air induced sounds

Power Probe OBD II Breakout Testing Box Specialty Measurement Chargers and charge cords mustThe can bus circuit tester is applicable for 12 and 24v systems. Once plugged into the cars DLC (OBD port) will start to check the pins for any voltage present. If the voltage present the respective LEDs will illuminate. This will test the vehicles link connector (OBD port) for any abnormality such as shorting and reverse polarity at the pins before the diagnostic tools (scanner) is plugged into the DLC. This will prevent damage to your other